We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

External mechanical stress causes mechanoluminescent materials to generate visible or invisible light. Excitation can be induced by bending or moderate pressure, but it can also be completely achieved without contact using ultrasound.

​​​​​​​The effect can be initiated remotely in this fashion, and light can be transported to ordinarily dark locations, such as the human body. If the ultrasonic therapy is used to create local heat at the same time, it is critical to monitor the temperatures that occur in such a delicate setting.

Material scientists from the Friedrich Schiller University in Jena, Germany, have discovered a mechanoluminescent material that can be used to generate local heat input by ultrasound while simultaneously providing feedback on the local temperature. They published their findings in the scientific journal Advanced Science.

The Jena scientists frequently engage with the mechanical characteristics of inorganic materials in their research, especially on how mechanical processes can be observed optically.

Mechanically induced light emission can provide us with many details about a material’s response to mechanical stress. But in order to expand the field of applications, it is sometimes also necessary to obtain additional information about the local temperature—especially when the excitation is carried out by means of ultrasound.

Lothar Wondraczek, Professor, University of Jena

Wondraczek added, “Here, we were initially interested in sensor materials in the form of ultra-fine particles, which—introduced into the environment to be studied—can provide feedback information about how ultrasound interacts with this environment.”

The Jena researchers achieved this by combining an oxysulfide semiconductor with erbium oxide, a rare earth element. The erbium oxide emits light after the semiconducting structure absorbs mechanical energy delivered by ultrasonic stimulation. Optical thermometry can then be used to read the temperature from the spectrum of the produced light.

“This means that we can stimulate a temperature increase from the outside, measure it from the characteristics of light emission, and thus establish a complete control circuit,” explained Wondraczek.

Remote-operated light emission in combination with temperature control might open up entirely new applications for mechanoluminescent materials, such as in medicine.

“One possible field of application could be photodynamic therapy, in which light is used to control photophysical processes that can support the organism in healing,” stated Wondraczek.

Not only could light and heat be created in the desired area but they could also be controlled in a targeted manner using multi-responsive mechanoluminescent materials in the form of very small particles. Since biological tissue is permeable to infrared light, the desired temperature can be established and controlled from the outside during therapy.

Wondraczek added, “However, such ideas are still very much in their infancy. Very extensive research and study are still needed in order to put them into practice.”

Other applications in which light and heat must be provided to dark regions in a targeted manner are more accessible. Photosynthesis and other light-driven processes, for example, could be precisely started, detected, and controlled.

Similarly, the material can be utilized as a sensor for creating or detecting material changes, as well as an invisible, coded marker on material surfaces.

Ding, Y., et al. (2022) Ultrasound-Induced Mechanoluminescence and Optical Thermometry Toward Stimulus-Responsive Materials with Simultaneous Trigger Response and Read-Out Functions. Advanced Science. doi:10.1002/advs.202201631

Source: https://www.uni-jena.de/en

Do you have a review, update or anything you would like to add to this news story?

AZoM spoke with James Baker from [email protected] about the growth of graphene as an advanced material and its potential to shape the sustainable future of multiple sectors.

AZoM speaks with Alan Banks from Ford Motor Company about the significance of using lightweight materials in vehicles to improve fuel efficiency and the sustainability of the industry.

AZoM speaks with Joseph Toombs, a Ph.D. student at the University of California, Berkeley, about his research that has developed a new 3D printing process for the manufacture of small glass objects.

This product profile outlines the MAX-iR FTIR Gas Analyzer from Thermo Fisher Scientific.

Learn more about the JAM-5200EBM E-Beam Metal Additive Manufacturing System for 3D Printing.

This product profile outlines the features and benefits of the Contour X - 500 3D Optical Profilometer.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022