Ethylene Oxide Sterilizer for Protective Suit and Medical Mask
Product name:2 cubic ethylene oxide sterilizer
Mask: 36000pcs one time
1 batch 12hours sterilization,
Product form:Manual door cabinet
Heating mode:electrical heating
Sterilizing chamber size:(L×W×H):2030×900×1100mm
Outer box size:(L×W×H):2250×1470×1880mm
Sterilizing chamber material:304 anticorrosive stainless steel
Outer box materialCarbon steel (1.8mm thick) baking powder
Sterilization temperature:50ºC ±3ºC
Maximum pressure resistance:-140kpa
Selected gas:mixed gas (80%EO,15%Carbon dioxide, 5% catalytic agent)
Ethylene oxide sterilization concentration:1g/L
Sterilization time:0-99 Hour adjustable
Vacuum speed:25 minutes to -60kpa
Air replacement:Automatic ventilation, air exchange frequency and interval can be set freely
Automatic control system:One-click start to end, the whole process is automatically completed with print record
Display status :Display temperature, humidity, pressure, sterilization time, residual gas treatment time, number of times
Printer:The whole process of sterilization information record printing, in order to verify the check.
Humidity sensor:The built-in humidity sensor automatically detects the humidity in the cavity to ensure that the humidity in the cavity is not lower than 45% RH.
Pressure sensor :The inner pressure sensor automatically detects the pressure inside the cavity to ensure the accuracy and efficiency of the pressure.
Temperature sensor:The built-in temperature sensor automatically detects the cavity temperature to ensure that the cavity temperature remains within the accurate range of 50 ºC ±3 ºC.
Humidifying system:Pulse humidification in the vacuum state ensures that the humidity in the cavity is uniform and controllable, and the humidity of the sterilizing chamber should be controlled within the range of 45- 80% relative humidity.
Residual gas treatment unit:Filtration efficiency of filter for particle diameter ≥ 0.3 μ m,not less than 99.5%.
Sterilization chamber leakage rate:The leakage rate was measured under the condition of no load, the temperature of sterilizing chamber was constant, the test pressure was -50 KPA, the measuring time was 1 h, and the average leakage rate was less than 0.16 KPA / min.
Vacuum rate:Under the condition of no load, the time of vacuum pumping from normal pressure to -60 KPA should be less than 30 minutes.
Vacuum system:Oil-free vacuum pump, simple and convenient, rapid vacuum rate, long service life.
Heating system :Adopt explosion-proof electric heating device, more convenient and quick
Tray rack:304 stainless steel tray rack
Multiple protective functions:It has the function of overvoltage and overtemperature protection, which is more safe and reliable.
Casters:Yes ,have .
Alarm system:High temperature alarm system, ultra low pressure alarm system, when sterilizing temperature exceeds 59 ºC, should be able to sound alarm.
Category:Class II medical devices
Other Products We Manufacture:
1. Paper Straw Making Machine
2. Blister Packing Machine
3. Automatic Cartoning Machine
4. Automatic oral/vial/ampoule Packing Production Line
5. Bundle machine
6. Blister-Card Packing Machine
7. Capsule Filling Machine
8. Soft Gel Encapsulation machine
9. Tablet Press Machine
10. Capsule/Tablet Counting Machine
11.Strip Packing Machine
12. Plastic Ampoule Filling and Sealing Machine
13. Sachet Filling and Sealing Machine
14. Tube Filling and Sealing Machine
15. Emulsifier Machine + tank
16. Labeling Machine
A1: We are manufacturer with own factory and exporting department.
Q2: What's the lead time of your machine?
A2: Normally it's about 30~45 working days.
Q3: What's the payment terms?
A3: 30% deposit TT, 70% paid before shipment; or L/C, Western Union.
Q4: Can we check machine before order?
A4: Yes, welcome to visit our factory and check machine anytime.
Q5: Is it difficult to install the machine ?
Q5: For standard small machines, the machines will be packed with no take apart, it comes to you to be a complete machine; you
just need to connect power and compressed air to machine, then begin to operate the machine.
For large size machines, we will take the machine apart, on condition that we do our best to keep the machine easy to assembly.
You will get videos and instructions about installation of machine from us.
Q6: Does the machine power voltage meet buyers' factory power source?
A6: We can do it as your request.