1. Introduction of Jig Machine:
Jig separator belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Saw-tooth wave jig is mainly consist of three parts: Main frame, driving set and jigging chamber. The device is suitable for sorting ferrous and nonferrous metals, chemicals, construction and metallurgical aspects of experimental research. |
2. Feature of Jig Machine:
1) High capacity 2) High concentration ratio and high recovery 3) Fabricated with highest quality material 4) Easy to install, operate and maintain 5) Long working life 6) The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling 7) Saving water 30-40% than ordinary jig 8) The pulsation speed very easy adjusted by regulator 9) Suitable for roughing and desliming 10)Can achieve a good result |
3. Working Principle Of Jig Machine
Jigs a kind of energy saving gravity equipment development and improved on the basis of traditional jigs according to the the oretic layering law of jig beds. Their jigging pulsation curves take the shape of sawtooth waveform which gets the ascending water to travel more rapidly than the descending water. The ascending time is short while the descending time is long. The problem that the ascending descending water flow and action time produced by sine wave and pulsation wave are the same is solved. The looseness of bed is strengthened and suction function is alleviated so that the heavy ore grains in the minerals are able to precipitate fully and the sorting ratio ability and recovery rate of equipment are largely improved. |
4. Types of jig machine
Sawtooth jigger is divided into left-style and right-style according to the installation location of feed pipe flange. At the ore feeding end toward to the ore discharge end, feed pipe flange on the left is left type, on the right is the right type. |
5. OPERATION INSTRUCTION of jig Machine
After the equipment has met 6.1, 6.2 requirements, it can be run. The operation sequence is as following: 1)Turn on the feeding water valve. After the jig is filled with water, adjust the feed water to meet the dressing requirements. 2) Let the knob of the electromagnetic adjustable speed motor control device to the smallest(Counterclockwise rotation), turn on the motor. 3)When the motor speed is stable, slowly rotates the knob of electromagnetic adjustable speed motor control device (that is to adjust the frequency). 4)After the device is operating normally, then feed the mineral uniformly. |
6. Technical specification of Jig Machine
Model | Chamber | Feeding Size mm | Water added m 3 /T | Pressure of water Mpa | Processing capacity t/h | Motor power kw | Dimension mm | Weight Kg | |
Shape | Area m 2 | ||||||||
JT0.57-1 | Ladder | 0.57 | 6 | 1-3 | ≥ 0.5 | 1-2.5 | 1.5 | 1550× 780× 1530 | 610 |
JT1-1 | Ladder | 1.04 | 10 | 1-3 | 2-4 | 2.2 | 2270× 1110× 1890 | 900 | |
JT2-2 | Rect | 2.28 | 10 | 1-3 | 4-8 | 3 | 3225× 1550× 2050 | 1640 | |
JT3-1 | Ladder | 3.3 | 10 | 1-3 | ≥ 0.5 | 6-10 | 5.5 | 3180× 2000× 2600 | 3260 |
JT5-2 | Ladder | 4.86 | 10 | 1-3 | 10-15 | 7.5 | 3600× 2000× 2600 | 4500 | |
JT1.5-2 | Rec t | 1.53 | 30 | 1-2 | ≥ 0.5 | 5-8 | 3 | 3200× 1550× 2050 | 1520 |
JT4-2 | Rect | 4.33 | 30 | 1-2 | 10-15 | 7.5 | 3600× 1850× 2600 | 4600 |
7. Packing & Loading:
--- Container---
40HQ/40GP/20GP |
--- Load Port---
Xiamen ,Guangzhou, Shenzhen,Shanghai or at customers' request |
8. About Us:
Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery. |
---Experienced Mining Machinery Manufacturer---
Our distinctive prodcts include shaking table, Jig, Spriral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, feeder, classifier, ore washing machine and lab equipment ect. Our machines are popular in separating GOLD, copper, manganes, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite,ect. |
--- PRE-SALE SERVICE ---
1) Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly; 2) Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing; 3) Design and provide the complete processing flowchart; 4) Design & manufacturer products according to clients' demands. |
--- AFTER-SALE SERVICE ---
1) Pre-check and test the products before delivery; 2) Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design; 3) Trace the status of the shipping until the products received; 4) Prepare required documents to let clients pass custom clearance; 5) Dispatch experts to carry out below service on site: 6) Provide technical exchanging & spare parts for life-long term |
--- ONE STOP SOLUTION ---
1) Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly; 2) Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant; 3) After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands. |
9. FAQ:
Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance. A:1). What type is the mining? Is it rock stone? or it is sand? Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc. Q: How long is the warrenty of your equipments? Does your company supply the spare parts?A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost. Q: If i need the complete mineral processing line. is Gelin able to help us build it?A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need. |
10. Welcome To Visit Our Factory!
Till now, our machines are exported to over 60 countries, such as United States, Canada, Peru, Brazil, Russia, England, Spain, Sudan, Morocco, Cote d'lvorie, Ghana, Congo, Mali, Zimbabwe, South Africa, Mozambique, Cameroon, Tanzania, Kenya, Angolia, India, Malaysia, Philippines, Indonesia, Australia, New Zealand, Mongolia, Myanmar etc... Looking Forward To Your Joinning!!! |