We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

New high-power electronic devices have been developed by engineers that are significantly more energy efficient than previous technologies. A new technique for carefully doping gallium nitride (GaN) allows for the creation of the devices.

Image Credit: NC State University

Many technologies require power conversion—where power is switched from one format to another. For example, the technology might need to convert AC to DC, or convert electricity into work—like an electric motor. And in any power conversion system, most power loss takes place at the power switch—which is an active component of the electrical circuit that makes the power conversion system.

Dolar Khachariya, Study First Author and Researcher, Adroit Materials Inc.

Khachariya added, “Developing more efficient power electronics like power switches reduces the amount of power lost during the conversion process. This is particularly important for developing technologies to support a more sustainable power infrastructure, such as smart grids.”

Our work here not only means that we can reduce energy loss in power electronics, but we can also make the systems for power conversion more compact compared to conventional silicon and silicon carbide electronics.

Ramón Collazo, Study Co-Author and Associate Professor, Materials Science and Engineering, North Carolina State University

“This makes it possible to incorporate these systems into technologies where they don’t currently fit due to weight or size restrictions, such as in automobiles, ships, airplanes, or technologies distributed throughout a smart grid”, stated Collazo.

In a study released in 2021, the researchers described a method for doping specific regions of GaN materials using ion implantation and activation. To deliberately alter the electrical characteristics of the GaN solely in those places, they introduced impurities into particular sections of GaN materials.

The researchers have shown how this method can be applied to produce genuine devices in their most recent work. To develop Junction Barrier Schottky (JBS) diodes, the researchers specifically employed materials that had been carefully doped with GaN.

Collazo stated, “Power rectifiers, such as JBS diodes, are used as switches in every power system. But historically they have been made of the semiconductors silicon or silicon carbide, because the electrical properties of undoped GaN are not compatible with the architecture of JBS diodes. It just does not work.”

“We have demonstrated that you can selectively dope GaN to create functional JBS diodes, and that these diodes are not only functional, but enable more power efficient conversion than JBS diodes that use conventional semiconductors. For example, in technical terms, our GaN JBS diode, fabricated on a native GaN substrate, has record high breakdown voltage (915 V) and record low on-resistance,” he continued.

Collazo further added, “We are currently working with industry partners to scale up production of selectively doped GaN, and are looking for additional partnerships to work on issues related to more widespread manufacturing and adoption of power devices that make use of this material.”

The study was published in the journal Applied Physics Express.

Spyridon Pavlidis, an assistant professor of electrical and computer engineering at NC State, Shashwat Rathkanthiwar, a postdoctoral researcher at NC State, Hayden Breckenridge, a former PhD student at NC State, Shane Stein, a PhD student at NC State, Erhard Kohn, a research associate at NC State and emeritus professor of Ulm University in Germany, Zlatko Sitar, Kobe Steel Distinguished Professor of Materials Science and Engineering at NC State and the founder of Adroit Materials, Will Mecouch, Seiji Mita, Baxter Moody, Pramod Reddy, James Tweedie and Ronny Kirste of Adroit Materials, and Kacper Sierakowski, Grzegorz Kamler and Michał Boćkowski of the Institute of High-Pressure Physics at the Polish Academy of Sciences are the co-authors of the study.

The majority of the funding for this work came from ARPA-PNDIODES E’s program through grants DE-AR0000873, DE-AR000149. Additional funding for the project came from the National Science Foundation (ECCS-1916800, ECCS-1508854, ECCS-1610992, DMR-1508191, and ECCS-1653383), the Naval International Cooperative Opportunities in Science and Technology program of the Office of Naval Research Global (N62909-17-1-2004), and Poland’s National Center for Research and Development (NCBR) (TECHMATSTRATEG-III/0003/2019-00).

Khachariya, D., et al. (2022) Vertical GaN Junction Barrier Schottky Diodes with Near-ideal Performance using Mg Implantation Activated by Ultra-High-Pressure Annealing. Applied Physics Express. doi:10.35848/1882-0786/ac8f81

Breckenridge, M. H., et al. (2021) High Mg activation in implanted GaN by high temperature and ultrahigh pressure annealing. Applied Physics Express. doi:10.1063/5.0038628

Source: https://www.ncsu.edu/

Do you have a review, update or anything you would like to add to this news story?

Dave Cist, Roger Roberts and Rob Sommerfeldt

In this interview, AZoM talks to Dave Cist, Roger Roberts, and Rob Sommerfeldt from GSSI about the Pavescan RDM, MDM, and their ground penetrating radar (GPR) capabilities. They also discuss how this can aid the asphalt production and laying processes.

Following the Advanced Materials Show 2022, AZoM spoke with Cameron Day from William Blythe about the broad scope of the company and its goals for the future.

At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.

The CVD Diamond from Element Six is a high purity synthetic diamond that is used for electronic thermal management.

Discover the CNR4 Net Radiometer, a powerful tool that can measure the energy balance between short-wave and long-wave Far Infrared radiation.

The Powder Rheology Accessory expands TA Instruments’ Discovery Hybrid Rheometer (DHR) capabilities to powders, enabling characterization of behaviors during storage, dispensing, processing, and end use.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022