Click here to sign in with or

With global energy-related carbon dioxide emissions reaching an all-time high in 2021, the need for clean energy is more pressing than ever. One such alternative to fossil fuels is solar energy. Solar cells have been developed with a variety of materials, but selenium (Se) is a desirable option because it is low-cost, stable and nontoxic, according to Chao Chen of the Wuhan National Laboratory for Optoelectronics (WNLO) and School of Optical Electronic Information at Huazhong University of Science and Technology, China.

However, its efficiency is limited by its low melting point and wide bandgap—the range where no electronic states can exist. Now, Chen and other researchers have overcome these limitations by alloying selenium with tellurium (Te), making selenium solar cells a more attractive option.

The researchers published their results in Frontiers of Optoelectronics.

The optimal bandgap range for single-junction solar cells is 1-1.5 eV, according to the researchers, but Se's bandgap is about 1.8 eV, making it broader than ideal for use in solar cells. The researchers were able to tune the solar cells to the Shockley-Queisser limit, which is the maximum theoretical efficiency of a single-junction solar cell, by pairing selenium with tellurium.

"Alloying [selenium] with tellurium, which has the same crystal structure and [has a] narrow bandgap, can tune the bandgap and increase the melting point, thus expanding the absorption spectrum and improving the quality of [the selenium solar cell] films," said Chen, associate professor at the School of Optical Electronic Information at Huazhong University of Science and Technology, who is the corresponding author. "Therefore Se1-xTex alloy is expected to achieve the improvement of solar cell efficiency."

The researchers also used zinc oxide (ZnO) as an electron transport layer in the fabrication of the solar cells because of the proper band alignment and mild reaction at the interface of the zinc oxide and the selenium/tellurium.

"Zinc oxide was selected as the electron transport layer, which can slightly react with Se to enhance its interfacial adhesion and to reduce dangling bonds and thus reduce interfacial defects," Chen said.

Chen said that this use of zinc oxide was one of the novel parts of this research, along with the analysis the researchers conducted on certain aspects of the selenium tellurium solar cells.

"The recombination mechanism and defect type of Se1-xTex alloy solar cell were analyzed by characterizations of light intensity dependent current-voltage, capacitance-voltage and temperature dependent admittance, which will help to further optimize the Se1-xTex alloy system," Chen said.

After fabricating the new selenium tellurium solar cells with zinc oxide electron transport layers, the researchers found that the new material retains the previously known positive traits of having a large absorption coefficient and being very photoconductive while improving efficiency.

"The efficiency of ZnO/Se0.7Te0.3 solar cells has more than doubled after nine months in the air," Chen said. "ZnO/Se0.7Te0.3 [is proven as] a superior junction with energy band matching and tight adhesion, and the efficiency of 1.85% has been achieved preliminarily."

The researchers are now looking to improve on their fabrication of the solar cells and then to scale the technology.

"The next step will be to prepare high-quality Se1-xTex alloy films—eliminate holes and vacancy defects and so on—and optimize device structure—adding the hole transport layer and so on—so as to further improve the efficiency of Se1-xTex alloy solar cells and achieve mass production." Explore further Team optimizes formula for cadmium-tellurium solar cells More information: Jiajia Zheng et al, Fabrication and characterization of ZnO/Se1-xTex solar cells, Frontiers of Optoelectronics (2022). DOI: 10.1007/s12200-022-00040-5 Provided by Higher Education Press Citation: Researchers improve efficiency of low-cost solar cells (2022, September 27) retrieved 9 October 2022 from https://techxplore.com/news/2022-09-efficiency-low-cost-solar-cells.html This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Use this form if you have come across a typo, inaccuracy or would like to send an edit request for the content on this page. For general inquiries, please use our contact form. For general feedback, use the public comments section below (please adhere to guidelines).

Please select the most appropriate category to facilitate processing of your request

Thank you for taking time to provide your feedback to the editors.

Your feedback is important to us. However, we do not guarantee individual replies due to the high volume of messages.

Your email address is used only to let the recipient know who sent the email. Neither your address nor the recipient's address will be used for any other purpose. The information you enter will appear in your e-mail message and is not retained by Tech Xplore in any form.

Daily science news on research developments and the latest scientific innovations

Medical research advances and health news

The most comprehensive sci-tech news coverage on the web

This site uses cookies to assist with navigation, analyse your use of our services, collect data for ads personalisation and provide content from third parties. By using our site, you acknowledge that you have read and understand our Privacy Policy and Terms of Use.